MAPCO
HOODS ARE BUILT TO LAST
All exhaust hoods shown on this page are standard hood
designs used frequently in the metal finishing industry. MAPCO
can design virtually any type of exhaust hood to fit your process. Proper
plenum velocity, slot velocity and takeoff size and velocity
are critical to hood performance.
All exhaust hoods are fabricated of corrosion resistant
materials such as PVC, polypropylene, stainless steel and FRP.
PVC and FRP exhaust hoods are fabricated with a minimum 3/16" thick
material. In many cases 1/4" and/or 3/8" material
is used.
|
M2A HOOD
MU HOOD
MLH HOOD |
HOOD
|
APPLICATION |
MSL HOOD
MSL HOOD
(double exhaust)
MM HOOD |
|
M2A
|
Low profile with end take-off
for tanks exceeding 30" in width. |
|
MSL
|
Low profile with end take-off.
|
MDL
MLH
MLH
(downdraft) |
Low profile with center
take-off for vertical or downdraft duct system. Typically
used on automatic or manual line when clearance is a
problem. |
|
MU3
|
High profile hood used for
venting fumes off parts as they exit tank. |
|
MU
|
Large slot for excessive
fuming at tank. |
|
MM
|
Low profile used when fuming
off part is not excessive. |
| 
MLH HOOD
(downdraft) |
MU3 HOOD |
MDL HOOD
(downdraft) |
STANDARD
FEATURES
- Flexible outlet connections
- Drains at low points
- Internal reinforcing
- Heavy gauge material
- Drip lips
|
OPTIONAL FEATURES
- Removable shields
- Adjustable baffles
- 3/8" clean out doors
- Removable mesh pads
- Removeable spray headers
|
